home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Amiga Plus 1995 #5 & #6
/
Amiga Plus CD - 1995 - No. 5 and 6.iso
/
pd
/
grafik
/
lightwave
/
lwmlo9505.txt
/
000056_owner-lightwave-l _Tue May 2 21:39:51 1995.msg
< prev
next >
Wrap
Internet Message Format
|
1995-06-03
|
1KB
Return-Path: <owner-lightwave-l>
Received: by netcom10.netcom.com (8.6.12/Netcom)
id VAA16744; Tue, 2 May 1995 21:18:16 -0700
Received: from earth.usa.net by mail.netcom.com (8.6.12/Netcom)
id TAA11653; Tue, 2 May 1995 19:09:44 -0700
Received: (from jgjones@localhost) by earth.usa.net (8.6.10/8.6.10) id UAA28580 for LIGHTWAVE-L@NETCOM.COM; Tue, 2 May 1995 20:07:35 -0600
Date: Tue, 2 May 1995 20:07:35 -0600
From: James Jones/Nibbles and Bits <jgjones@earth.usa.net>
Message-Id: <199505030207.UAA28580@earth.usa.net>
To: LIGHTWAVE-L@netcom.com
Subject: Cylinderical image maps s
Content-Length: 768
Sender: owner-lightwave-l@netcom.com
Precedence: bulk
> Does anyone know how I can alter the seam angle on a cylinderical image
> map? I'm building a circular room with an entrance and exit that are
> just off center and I need to find a way of shifting my image map round
> a few degrees so that the seam is above either the entrance or exit.
Try rotating the "room" object in modeler (rotate around 0,0,0) so that
the image will line up properly, and then just un-rotate it in Layout.
If other sufaces will be messed up by this method, separate the
surface that needs to rotate out as another object.
-Jim
| AmiQWK 2.7 - S/N 0232 |
... James G. Jones * NIBBLES & BITS * jgjones@usa.net